Band heater: Monforts numbers
Band heater: Monforts no. 6009250000459, plus 7 further numbers for versions.
The band heater is intended for the cylinder or nozzle of the press. For each number, the table gives the version (ceramic or brass) as well as diameter, length and power, where stated.
Our versions have an integrated temperature sensor and, as an option, a multi-pin industrial plug (sensor, thermostat) or a Schuko plug (mains side). They are our own versions and are not assigned to a Monforts number.
Versions: ceramic, brass.
All parts are listed in the parts catalogue.
Sensor and plug
We supply the band heater with an integrated temperature sensor and, as an option, with two plugs: the multi-pin industrial plug for sensor and thermostat or the Schuko plug for the mains side. We will clarify with you in your inquiry which version you need.
- Temperature sensor, integrated in the band heater
- Industrial plug, multi-pin, for sensor and thermostat
- Schuko plug for the mains side
Matching controller (accessory): Heating controller, for PT100 sensors
All Monforts numbers
Band heater: 8 numbers. The number is the article number under which the part is listed at IBG Monforts; please state it in your inquiry.
| Monforts no. | Detail | Inquiry |
|---|---|---|
| 6009250000459 | Ceramic, Ø 54 x 35 mm, 300 W, 220 V, A = 1200 mm long | Send inquiry 6009250000459 |
| 6009250000436 | Brass, Ø 58 x 48 mm, with toggle switch | Send inquiry 6009250000436 |
| 6009250000162 | Brass, Ø 89 x 60 mm | Send inquiry 6009250000162 |
| 6009250002846 | Ceramic, for nozzle, Ø 200 x 60 mm, max. 800 W, 220 V, 50 Hz, A = 1200 mm long | Send inquiry 6009250002846 |
| 6009250002853 | Brass, for nozzle, Ø 89 x 60 mm, with anti-kink sleeve, 1000 mm long | Send inquiry 6009250002853 |
| 6009900001467 | Brass, for cylinder, Ø 204 x 120 mm, brass insert to Ø 200 mm | Send inquiry 6009900001467 |
| 6009250000070 | Ceramic, Ø 85 x 60 mm, 400 W, 220 V, 50 Hz, A = 1200 mm long | Send inquiry 6009250000070 |
| 6009900011501 | Ceramic, 85 x 50 mm, 400 W, 220 V, 50 Hz, A = 1200 mm long | Send inquiry 6009900011501 |
Which part do I need?
Three details are enough for the inquiry:
- type designation of the machine from the nameplate, for example D85-1G or Oleo P 20
- a photo of the part or the place where it is fitted
- if possible the dimensions of the old part and the seed you press
We check which part fits and get back to you with a quotation.