The most common mistakes when pressing oil – and how to avoid them
Introduction
When pressing oil, small details often decide between success and failure. Many problems such as low yield, poor quality or machine wear can be traced back to typical mistakes.
The good news: these mistakes are easy to avoid – once you know them.
Mistake 1: Wrong seed quality
The quality of the seed is the most important factor for oil yield.
Typical problems:
- moisture too high
- impurities
- old or incorrectly stored seed
Mistake 2: Wrong setting of the oil press
A wrong setting leads to:
- too little pressure
- incomplete pressing
- inefficient operation
Understand how it works:
Mistake 3: The wrong machine
Not every oil press suits every use. Capacity and screw should match your seed and your planned quantity. The guide to buying an oil press can help; which screw suits which seed is shown in the Seeds overview.
Mistake 4: Neglecting maintenance
Wear parts must be checked regularly.
Typical consequences:
- falling yield
- higher energy costs
- machine damage
Maintenance in detail:
Mistake 5: Ignoring heat build-up
The heat generated by friction during pressing affects:
- quality
- yield
- shelf life
Understand the differences:
Cold pressing vs. hot pressing
Mistake 6: Wrong expectations of yield
Many people expect too much oil from the seed. The oil content of a seed is not the yield: part of the oil stays in the press cake. The yield calculator provides realistic guide values.
Mistake 7: Not using the press cake
Press cake can be used, for example as animal feed or milled into flour. Anyone who throws it away gives up a co-product. More on this under Using the press cake.
Conclusion
Most problems when pressing oil are avoidable.
Anyone who:
- uses the right seed
- sets the machine correctly
- maintains it regularly
will generally achieve better results.
Find the right machine now:
Further reading: Seed list (58 seeds) · Oil mill yield calculator · Our oil presses · Spare parts for oil presses