This website was created with the help of AI and checked by us. Learn more

+49 2161 9173807office@oleopress.com
OleoPressInquiry

Cold pressing with OleoPress: technology, material and service

This article describes what you should bear in mind when buying and operating an oil press and what OleoPress presses bring to the table.

Reading time about 2 minutes

As of: November 2026

Anyone investing in an oil press today lays the foundation for their business model. Whether organic farmer, farm shop or cosmetics workshop: what matters is a suitable machine, readily available spare parts and expert advice.

Cold pressing and frictional heat

In every screw press, friction generates heat. How much depends on the seed, speed and nozzle setting. A well-adjusted press keeps this heat low. All models of the P series from P 8 to P 40 have a heating jacket; it supports starting the press and pressing very hard seeds.

Material and workmanship

A look inside an oil press says a lot about its service life. Press screw and press cylinder are wear parts that are heavily stressed by hard seeds. The variants P 20 N and P 40 N are also available. You will find details on the respective model pages.

Made in Germany and Europe.

Versatility from linseed to grape seed

With different press cylinders (type R and type E) and press screws (R6, R8, R11), the press can be adapted to different seeds. Which screw suits which seed is shown in the overview Seeds. Anyone who presses rapeseed today can later process other seeds such as black cumin with the same machine, provided the screw and cylinder match.

Yield and residual oil

Economic efficiency is also measured by the oil that remains in the press cake. How much that is depends on the seed, speed and nozzle setting. We are happy to advise you on the right setting for your seed.

Spare parts and support

What happens when a seal tears or a bearing has to be replaced after years? We supply spare parts for our presses and advise you personally.

Cleaning and hygiene

Old oil turns rancid and can affect the next batch. Therefore clean the press thoroughly after operation. How the press unit can be dismantled is explained in the operating instructions for your model.

Press cake as a second product

The press cake can be processed into animal feed or flour. More on this in the article Economics of cold pressing.

Conclusion

An oil press is a long-term purchase. Please compare purchase, maintenance, spare parts supply and yield. We are happy to advise you on this: get in touch or view the models in Our oil presses.

Inquiry list

Nothing saved yet.

Inquiry by emailTo the contact page