Press screw / worm
Similar to the parts for IBG Monforts oil presses, but not interchangeable, see Comparison of Monforts and Oleo P. Made of hardened steel, in the variants R6, R8 and R11.

Versions
All parts on request.
IBG Monforts
Spare parts suitable for machines of IBG Monforts (e.g. CA59, D85, DD85).
Small press

R6 press screw, compatible with Monforts Oekotec
For small oil presses.
Monforts no. (5)
CA59
- 6006821000102 Hardened, polished, not chrome-plated
- 6006821000017
- 6006821000047
DD85
- 6006020600011
- 6006821000005
on requestSend inquiry to R6 press screw, compatible with Monforts Oekotec
Large press

R8 press screw, compatible with Monforts Oekotec
For hard seed such as rapeseed and sunflower.
Monforts no. (9)
DD85
- 6006821000008
- 6006700000260 long
- 6009900000376 Material 1.4112
- 6006020600012 long
- 6006020600009 Material 1.7225 (42CrMoV4)
- 6006821000105 Without chrome plating, unhardened
- 6006821000009
- 6006821000011 With blind hole
- 6006821000004 R10
on requestSend inquiry to R8 press screw, compatible with Monforts Oekotec

R11 press screw, compatible with Monforts Oekotec
For soft seed such as linseed and walnuts.
Monforts no. (4)
DD85
- 6006821000091
- 6009900001265
- 6006020600013 long
- 6006821000104 Without chrome plating, unhardened
on requestSend inquiry to R11 press screw, compatible with Monforts Oekotec
Oleo P
Spare parts for the Oleo P: press screws, perforated strainer cages, press head and nozzle.
Small press

OleoPress Press screw, small
For small oil presses.
Large press

OleoPress Press screw, hard version
For hard seed such as rapeseed and sunflower.
on requestSend inquiry to OleoPress Press screw, hard version

OleoPress Press screw, soft version
For soft seed such as linseed and walnuts.
on requestSend inquiry to OleoPress Press screw, soft version
Which part do I need?
Three details are enough for the inquiry:
- type designation of the machine from the nameplate, for example D85-1G or Oleo P 20
- a photo of the part or the place where it is fitted
- if possible the dimensions of the old part and the seed you press
We check which part fits and get back to you with a quotation.
Variants at a glance
| Variant | Use |
|---|---|
| R6 | Small oil presses |
| R8 | Hard seed such as rapeseed and sunflower |
| R11 | Soft seed such as linseed and walnuts, adapted screw geometry for lower resistance |


We are happy to discuss with you which screw suits your seed.
Function of the press screw
The press screw is a central component of an oil press. It is the worm that conveys the oil seed through the press cylinder and presses it under high pressure against a nozzle. This pressure forces the oil out of the seed. A high-quality press screw ensures:
- Constant pressure: even performance for continuous oil production.
- Efficient discharge of the oil from the pressed material.
- Oil quality: minimising frictional heat in the cold pressing process.
- Shaping of the press cake: At the end of the cylinder the solid residue is pressed out through the nozzle as pellets or flakes.
You can find all spare parts in the overview of oil press spare parts.