IBG Monforts oil press – models and spare parts
Models, technical data and spare parts for the oil presses of IBG Monforts Oekotec GmbH & Co. KG – and what has become of them today.
IBG Monforts Oekotec GmbH & Co. KG – a look back
Anyone looking for an IBG Monforts oil press soon comes across a name that was well known in the world of screw oil presses: IBG Monforts Oekotec GmbH & Co. KG from Mönchengladbach. The company made cold-press machines that were widely used on farms, in oil mills, in direct marketing and in commercial operations.
Models such as the CA59, the D85, the DD85 and the S120F were produced for many years. Owners of these machines are now often looking for spare parts and maintenance information.
Do you still own an IBG Monforts oil press and are looking for spare parts or support? OleoPress offers spare parts for these oil presses. Please note: the parts of the Oleo P machines are not interchangeable with Monforts parts.
Since the insolvency (March 2023, opening of the preliminary proceedings), IBG Monforts Oekotec has no longer been active. For many owners of these machines this means: spare parts from the former manufacturer are hard to find, manufacturer support has ended, and repairs have to be carried out with alternative parts or by specialised suppliers. This is exactly where OleoPress comes in.
The models at a glance
The model ranges differ in capacity, drive power and intended use: from the CA59-1H hand press to the S120F with 7.5 kW. The technical data at a glance:
| Model | Capacity (kg/h) | Motor power (kW) | Weight (kg) | Dimensions L×W×H (mm) |
|---|---|---|---|---|
| CA59-1H | 1–3 | Hand-operated | 30 | 910 × 300 × 500 |
| CA59-G | 3–5 | 1.1 | 80 | 680 × 580 × 550 |
| D85-1G | 10–25 | 3.0 | 310 | 1080 × 800 × 600 |
| DD85-G | 20–50 | 3.0 | 325 | 1080 × 800 × 600 |
| S120F | 50–100 | 7.5 | 440 | 1670 × 825 × 1320 |
The D85-1G and DD85-G have the same motor power and dimensions; the DD85-G is fitted with a twin-screw system and, according to the data sheet, has a higher capacity (20–50 instead of 10–25 kg/h).
All models with technical data
How it works: how the IBG Monforts oil press operates
All motorised models of the IBG Monforts oil press series work on the screw press principle (also known as an expeller press). The seed to be pressed – whether rapeseed, linseed, sunflower seeds, walnuts or other oil-bearing seeds – is placed in the feed hopper and carried by a rotating feed screw into the press cylinder.
In the press cylinder the pressure is raised step by step by the narrowing screw geometry. The oil escapes through slots in the press cylinder and is collected in a catch container. The remaining press residue (oil cake) is ejected through a nozzle at the end of the press cylinder. This cake is rich in protein and can be reused as animal feed or fertiliser.
Note on cold pressing: In cold pressing, the seed is pressed purely mechanically, without chemical solvents. Many seeds contain valuable constituents such as fatty acids, vitamins and secondary plant compounds. Which of these remain in the oil depends on the seed, the temperature and the process.
The principle of the IBG Monforts oil presses has remained unchanged in modern screw presses to this day. What has changed are material qualities, control technology, energy efficiency and the availability of spare and wear parts.
Company history and insolvency
The IBG Monforts group was founded in 1884 by August Monforts in Mönchengladbach; the oil press division traded as IBG Monforts Oekotec GmbH & Co. KG. The oil presses were sold under the brand “Komet”.
- 1884: August Monforts founds the company in Mönchengladbach.
- November 2020: Insolvency petition by the parent company IBG Monforts GmbH & Co.; Oekotec was initially not directly affected.
- March 2023 (opening of the preliminary proceedings): Insolvency proceedings concerning IBG Monforts Oekotec GmbH & Co. KG.
- Today: No production, no sales and no spare parts service from the manufacturer.
Spare parts for IBG Monforts oil presses
We offer spare parts for vegetable oil presses from IBG Monforts Oekotec. Monforts parts are similar to Oleo parts, but not interchangeable.
The biggest challenge for operators of IBG Monforts oil presses today is obtaining spare and wear parts. The machines are durable, but screws, press cylinders, nozzles, press head and connecting nuts are subject to natural wear, especially with regular use.
Because the original manufacturer no longer exists, parts from the former manufacturer are now hard to obtain. OleoPress offers spare parts for common oil press models, including spare parts for IBG Monforts models.
Typical wear parts on screw oil presses
- Press screw (worm): The most heavily loaded component. It conveys the material under high pressure and, depending on pressing volume and type of seed, wears out within months to years.
- Press cylinder: The slots through which the oil escapes can narrow or wear out over time. A defective press cylinder considerably reduces yield and oil quality.
- Nozzle: Largely determines the residual oil content in the cake and the temperature during pressing. It is a key adjustment element and must be replaced or adapted when necessary.
- Press head, connecting nut, feed hopper: Further parts that should be checked regularly and, if necessary, replaced during intensive use.
Monforts spare parts on request
Spare parts for Monforts oil presses are available on request. Get in touch – we will clarify what is available for your model.
You can find more on this, and advice, under Comparison of Monforts and Oleo P. If you have questions, we are happy to advise you in person.
New oil presses from OleoPress
Anyone who owns an IBG Monforts oil press sooner or later faces the question: keep repairing, or invest in a new machine? The answer depends on the condition of the machine, the extent of the repair and your own requirements.
With the model ranges Oleo P 8, Oleo P 10, Oleo P 20 and Oleo P 40, OleoPress offers screw oil presses.
A machine of the Oleo P series is not interchangeable with a Monforts model. You can find all models under Our oil presses.
Advice on spare parts and machines
Our team helps you find the right solution for your IBG Monforts oil press – whether a spare part, a repair recommendation or a new machine.
Frequently asked questions about the IBG Monforts oil press
Are spare parts from the former manufacturer still available for IBG Monforts oil presses?
Parts from IBG Monforts Oekotec are hard to find now that production has ended. OleoPress offers spare parts for the common wear points of the machines. Get in touch – we will clarify what is available for your model.
What can I press with a screw oil press?
Typical oil seeds are rapeseed, linseed, sunflower, pumpkin seeds, walnuts, hemp seed, mustard and many others. Suitability depends on the moisture, oil content and hardness of the seed. If in doubt, we recommend a test run with a small quantity.
Is it still worth repairing an IBG Monforts oil press?
That depends on its condition. If the base frame, motor and gearbox are still in order, replacing the wear parts (screw, press cylinder, nozzle) is often worthwhile. If, however, the machine as a whole badly needs refurbishing, a new machine may be more economical.
Where was IBG Monforts based?
IBG Monforts Oekotec GmbH & Co. KG was based in Mönchengladbach – just like OleoPress. We are based in Mönchengladbach and are your contact for everything to do with oil presses.
OleoPress – your contact for oil presses in Mönchengladbach
OleoPress is a company specialising in oil presses and their accessories, based in Mönchengladbach. We understand the challenges that operators of these machines face today.
Our range includes spare parts for oil presses of various sizes and types, oil presses of the Oleo P series as well as matching filter presses and bottling plants for professional oil production. Whether you want to modernise your IBG Monforts operation or start from scratch – we support you from the first consultation to day-to-day running.
Get in touch: +49 2161 9173807 or visit us directly in Mönchengladbach. We look forward to your inquiry.