This website was created with the help of AI and checked by us. Learn more

+49 2161 9173807office@oleopress.com
OleoPressInquiry

Oil presses and spare parts for your oil mill

Kambas OleoPress UG from Mönchengladbach, Germany supplies spare parts for oil presses, Oleo P series oil presses, filter presses and bottling plants. Worldwide delivery is possible.

Discover spare partsDiscover our oil presses

Our products

The Oleo P series

Made in Germany and Europe.

Outlines to the same scale (length and height according to data sheet). The seed throughput depends on the seed.

Spare parts for oil presses

High pressures, abrasive materials such as oilseeds and nuts, and continuous operation put every component under enormous strain.

Parts catalogue

All parts on request.

IBG Monforts

Spare parts suitable for machines of IBG Monforts (e.g. CA59, D85, DD85).

Small press

Large press

  • R8 press screw, Photo

    R8 press screw, compatible with Monforts Oekotec

    For hard seed such as rapeseed and sunflower.

    Monforts no. (9)

    DD85

    1. 6006821000008
    2. 6006700000260 long
    3. 6009900000376 Material 1.4112
    4. 6006020600012 long
    5. 6006020600009 Material 1.7225 (42CrMoV4)
    6. 6006821000105 Without chrome plating, unhardened
    7. 6006821000009
    8. 6006821000011 With blind hole
    9. 6006821000004 R10
    All numbers

    on requestSend inquiry to R8 press screw, compatible with Monforts OekotecLearn more to R8 press screw, compatible with Monforts Oekotec

  • R11 press screw, Photo

    R11 press screw, compatible with Monforts Oekotec

    For soft seed such as linseed and walnuts.

    Monforts no. (4)

    DD85

    1. 6006821000091
    2. 6009900001265
    3. 6006020600013 long
    4. 6006821000104 Without chrome plating, unhardened
    All numbers

    on requestSend inquiry to R11 press screw, compatible with Monforts OekotecLearn more to R11 press screw, compatible with Monforts Oekotec

  • Press cylinder, Photo

    Press cylinder, compatible with Monforts Oekotec

    Square groove (E) or round groove (R) version, selectable aperture for your cold-pressed oil: 0.8 mm, 1.0 mm, 1.5 mm or 2.0 mm.

    Monforts no. (12)

    CA59

    1. 6009900000281 1.5 mm
    2. 6006821000018
    3. 6006821000099
    4. 6006821000106

    DD85

    1. 6006821000037 1.0 mm
    2. 6006821000136 0.5 mm, slotted
    3. 6006821000036 1.5 mm
    4. 6006821000096 Material 1.4301
    5. 6009900021465 1.0 mm, round groove, material 1.4112
    6. 6009900021522 1.0 mm, round groove, material 31CrMoV9
    7. 6009900021466 1.5 mm, round groove, material 1.4112
    8. 6009900021521 1.5 mm, round groove, material 31CrMoV9
    All numbers
    • Type E (square groove)
    • Type R (round groove)
    • Aperture 0.8 / 1.0 / 1.5 / 2.0 mm

    on requestSend inquiry to Press cylinder, compatible with Monforts OekotecLearn more to Press cylinder, compatible with Monforts Oekotec

  • Press head, Photo

    Press head, compatible with Monforts Oekotec

    Monforts no. (9)

    CA59

    1. 6006821000016
    2. 6006821000100 Material 1.4301
    3. 6006821000048 Insert type

    DD85

    1. 6006821000006
    2. 6006821000115 Material 1.4112
    3. 6006821000045
    4. 6006821000046
    5. 6006821000095 Material 1.4301
    6. 6006821000098 Round grooves (coffee)
    All numbers

    on requestSend inquiry to Press head, compatible with Monforts OekotecLearn more to Press head, compatible with Monforts Oekotec

  • Connecting nut, Photo

    Connecting nut, compatible with Monforts Oekotec

    Monforts no. (7)

    DD85

    1. 6006821000007
    2. 6006821000040 For clamping piece
    3. 6006821000060 For clamping piece
    4. 6006821000083 For clamping insert piece
    5. 6006821000116 Material 1.4301
    6. 6006821000094 Material 1.4301

    S120

    1. 6006821000035 Material 1.2379 (X155CrMo121)
    All numbers

    on requestSend inquiry to Connecting nut, compatible with Monforts OekotecLearn more to Connecting nut, compatible with Monforts Oekotec

  • Nozzle, compatible with Monforts Oekotec

    In several sizes, to suit the seed.

    Monforts no. (68)
    1. 6006822000041 Ø 4 mm
    2. 6006822000063 Ø 4 mm
    3. 6006822000068 Ø 4 mm
    4. 6006822000047 Ø 4.5 mm
    5. 6006822000031 Ø 5 mm
    6. 6006822000064 Ø 5 mm
    7. 6006822000069 Ø 5 mm
    8. 6006822000032 Ø 5.5 mm
    9. 6006822000065 Ø 6 mm
    10. 6006822000070 Ø 6 mm
    11. 6006822000066 Ø 8 mm
    12. 6006822000071 Ø 8 mm
    13. 6006822000067 Ø 10 mm
    14. 6006822000072 Ø 10 mm

    CA59

    1. 6006822000104 Ø 2 mm
    2. 6006822001141 Ø 2.5 mm
    3. 6006822000004 Ø 3 mm
    4. 6006822000009 Ø 4 mm
    5. 6009900001455 Ø 4 mm
    6. 6006822000054 Ø 4.5 mm
    7. 6006822000008 Ø 5 mm
    8. 6009900001456 Ø 5 mm
    9. 6006822000053 Ø 5.5 mm
    10. 6006822000007 Ø 6 mm
    11. 6009900001457 Ø 6 mm
    12. 6006822000006 Ø 8 mm
    13. 6009900001458 Ø 8 mm
    14. 6006822000035 Ø 9 mm
    15. 6006822000005 Ø 10 mm
    16. 6009900001459 Ø 10 mm

    DD85

    1. 6006822000141 Ø 3 mm
    2. 2002400000175 Ø 4 mm
    3. 6006822000049 Ø 5.2 mm
    4. 6006822000050 Ø 5.3 mm
    5. 6006822000051 Ø 5.4 mm
    6. 6006822000010 Ø 6 mm, stainless steel
    7. 6006822000025 Ø 6 mm
    8. 6006822000042 Ø 6 mm
    9. 6006822000113 Ø 6 mm
    10. 6006822000030 Ø 7 mm
    11. 6006822000038 Ø 7.5 mm
    12. 6006822000014 Ø 8 mm, stainless steel
    13. 6006822000026 Ø 8 mm
    14. 6006822000043 Ø 8 mm, material 1.4571
    15. 6006822000114 Ø 8 mm
    16. 6006822000037 Ø 8.5 mm
    17. 6006822000039 Ø 9 mm
    18. 6006822000048 Ø 9 mm
    19. 6006822000011 Ø 10 mm, stainless steel
    20. 6006822000027 Ø 10 mm
    21. 6006822000044 Ø 10 mm, material 1.4571
    22. 6006822000115 Ø 10 mm
    23. 6006822000000 Ø 11 mm
    24. 6006822000012 Ø 12 mm, stainless steel
    25. 6006822000028 Ø 12 mm
    26. 6006822000045 Ø 12 mm
    27. 6006822000116 Ø 12 mm
    28. 6009900001475 Ø 13 mm
    29. 6006822000033 Ø 14 mm
    30. 6006822000013 Ø 15 mm, stainless steel
    31. 6006822000029 Ø 15 mm
    32. 6006822000046 Ø 15 mm, material 1.4571
    33. 6006822000117 Ø 15 mm
    34. 6006822000052 Ø 16 mm
    35. 6006822000015 Ø 18 mm, material 9S20k
    36. 6006822000040 For insert

    S120

    1. 6006822000059 7 holes
    2. 6006822000062 4 holes
    All numbers
    • Nozzles Ø 5–16 mm

    on requestSend inquiry to Nozzle, compatible with Monforts OekotecLearn more to Nozzle, compatible with Monforts Oekotec

  • Flange, compatible with Monforts Oekotec

    Standard and stainless steel version.

    Monforts no. (6)
    1. 6009900000243 Gearbox flange
    2. 6009900001243 Gearbox flange

    CA59

    1. 6006821000019
    2. 6006821000097

    DD85

    1. 6006821000020
    2. 6006821000114
    All numbers
    • Standard
    • Stainless steel

    on requestSend inquiry to Flange, compatible with Monforts OekotecLearn more to Flange, compatible with Monforts Oekotec

  • Connecting ring, compatible with Monforts Oekotec

    on requestSend inquiry to Connecting ring, compatible with Monforts Oekotec

Drive

  • Gearbox, compatible with Monforts D85 and DD85

    Gearbox for the Monforts machines D85 and DD85. Width 520 mm, height 350 mm, length 195 mm.

    Monforts no. (5)

    DD85

    1. 6006235600029
    2. 6006235600030 Welded construction
    3. 6006700000178
    4. 6006235600027
    5. 6006235600028 With gear oil for the food industry
    All numbers

    on requestSend inquiry to Gearbox, compatible with Monforts D85 and DD85

Heating

  • Band heater, compatible with Monforts Oekotec

    Band heater for cylinder or nozzle.

    Monforts no. (8)
    1. 6009250000459 Ceramic, Ø 54 x 35 mm, 300 W, 220 V, A = 1200 mm long
    2. 6009250000436 Brass, Ø 58 x 48 mm, with toggle switch
    3. 6009250000162 Brass, Ø 89 x 60 mm
    4. 6009250002846 Ceramic, for nozzle, Ø 200 x 60 mm, max. 800 W, 220 V, 50 Hz, A = 1200 mm long
    5. 6009250002853 Brass, for nozzle, Ø 89 x 60 mm, with anti-kink sleeve, 1000 mm long
    6. 6009900001467 Brass, for cylinder, Ø 204 x 120 mm, brass insert to Ø 200 mm
    7. 6009250000070 Ceramic, Ø 85 x 60 mm, 400 W, 220 V, 50 Hz, A = 1200 mm long
    8. 6009900011501 Ceramic, 85 x 50 mm, 400 W, 220 V, 50 Hz, A = 1200 mm long
    All numbers
    • Ceramic
    • Brass
    • With integrated temperature sensor and 5-pin industrial plug, in 400 W and 300 W (230 V, cable 1.2 m)
    • Optionally with industrial plug (multi-pin) for sensor and thermostat or with Schuko plug for the mains side
    • Temperature sensor, integrated in the band heater
    • Industrial plug, multi-pin, for sensor and thermostat
    • Schuko plug for the mains side

    Matching controller (accessory): Heating controller, for PT100 sensors

    on requestSend inquiry to Band heater, compatible with Monforts Oekotec

  • Heating controller, compatible with Monforts Oekotec

    Temperature controller for band heaters, for PT100 sensors.

    Monforts no. 6009900001266 All numbers

    on requestSend inquiry to Heating controller, compatible with Monforts Oekotec

Miscellaneous spare parts

Drive

  • Feather key, compatible with Monforts Oekotec

    Monforts no. (7)
    1. 6008068850001 8 x 7 x 40, DIN 6885
    2. 6008068850007 6 x 6 x 30, DIN 6885
    3. 6008068850005 8 x 7 x 24, DIN 6885
    4. 6008068850018 8 x 7 x 25, DIN 6885
    5. 6008068850004 8 x 7 x 53, DIN 6885
    6. 6008068850002 8 x 7 x 57, DIN 6885
    7. 6008068850021 A 5 x 5 x 40, DIN 6885
    All numbers

    on requestSend inquiry to Feather key, compatible with Monforts Oekotec

Connection

Tools

Oleo P

Spare parts for the Oleo P: press screws, perforated strainer cages, press head and nozzle.

Small press

Large press

Miscellaneous spare parts

Drive

Connection

Tools

Tools

  • Yield calculator

    Enter seed and quantity and see the oil yield in litres. The calculation is done directly on the page.

    Calculate yield
  • Seed list (58 seeds)

    For each seed the matching press screw, the machine and the oil content as a guide value.

    View seed list
  • HACCP

    Document your own checks digitally, for food businesses and also for oil mills. With a note on HACCP only from CI4U.

    View HACCP
Choose component

Nut

Nozzle

Marked in the section: waste nozzle in the press head. This sheet: nozzle as a single part.

Gearbox

Gearbox for the Monforts machines D85 and DD85, on request. Not shown in the section.

Width
520 mm
Height
350 mm
Length
195 mm

With shaft and output around 516 mm.

Send inquiry to Gearbox

Longitudinal section and individual parts shown in simplified form, without dimensions. Housing, hopper and gearbox schematic.

Your specialist for oil presses and spare parts – advice and sales from Mönchengladbach

OleoPress is your point of contact for spare parts for oil presses and professional screw presses. Behind our company is a team of mechanical engineering experts who advise you on selection and maintenance. We offer spare parts and machines for IBG Monforts Oekotec models and deliver worldwide.

Whether press screw, press cylinder, press head, nozzle and more, or complete oil presses of the Oleo P series – with us you get oil presses and spare parts. Made in Germany and Europe.

Spare parts and machines for IBG Monforts Oekotec

OleoPress offers spare parts and machines for IBG Monforts oil presses. We offer spare parts for the following models:

  • IBG Monforts CA59 (CA59-1H and CA59-G)
  • IBG Monforts D85 and DD85
  • Models from other manufacturers on request

The parts of the Oleo P presses are comparable with the Monforts spare parts, but not interchangeable. You will find details on the page Comparison of Monforts and Oleo P.

The demands on spare parts for screw presses and cold pressing plants are high: high pressures, abrasive materials such as oilseeds and nuts, and continuous operation put every component under enormous strain.

  • Fast delivery Short delivery times thanks to OleoPress holding stock of the most requested parts.
  • Personal advice Direct contact with technical experts.
  • Worldwide shipping We deliver internationally, with experience in global logistics.

Complete processing line

  1. Oilseeds and nuts

  2. Oil pressesOleo P series

  3. Filter pressesOleo F series

  4. Bottling plantsAF3 and AF4

  5. Your oil

Schematic diagram

Our range: spare parts, oil presses and accessories

At OleoPress you will find what you need to operate and maintain your oil press – from individual wear parts to a complete new plant.

Spare parts for oil presses

Our most requested spare parts include press screws (worm screws) in the R6, R8 and R11 versions, press cylinders (strainer cages) in various sizes, as well as press head and nozzles, each for small and large presses.

Our oil presses: the Oleo P series

Besides spare parts, we offer our Oleo P series of oil presses – made in Germany and Europe, available in the performance classes Oleo P 8, Oleo P 10, Oleo P 20 and Oleo P 40, each in different equipment variants. The Oleo P presses are designed for the professional cold pressing of oilseeds, nuts and other oil-bearing raw materials.

Filter presses and bottling plants

For a complete processing line we also offer filter presses of the Oleo F series as well as bottle filling plants (AF3 and AF4) – for oil mills that want to market their product directly.

Cold pressing: quality starts with the right components

AI-generated scene

Cold pressing is a gentle method of oil extraction: oilseeds – from rapeseed and sunflower seeds to walnuts – are pressed purely mechanically and without chemical solvents. Many seeds contain valuable constituents such as fatty acids, vitamins and secondary plant compounds. Which of these remain in the oil depends on the seed, temperature and process. At the same time, cold pressing places high mechanical demands on the screw, cylinder and press head, because these components transmit the pressure needed for a good yield.

Worn or poorly fitting spare parts reduce the yield, increase energy consumption and, in the worst case, can lead to plant failure.

Send inquiry

On this page: Sections

Inquiry list

Nothing saved yet.

Inquiry by emailTo the contact page

To the model page