This website was created with the help of AI and checked by us. Learn more

+49 2161 9173807office@oleopress.com
OleoPressInquiry

Cold-pressed and hot-pressed: the difference in the process

Vegetable oils are obtained in different ways. In cold pressing, the seed is pressed purely mechanically and is not additionally heated. This article explains how the process differs from hot pressing.

Reading time about 2 minutes

As of: November 2026

Cold pressing: purely mechanical, without chemical solvents

In cold pressing, the seed (for example rapeseed, sunflower seeds or linseed) is passed through a screw press. What matters is that the oil is obtained purely mechanically, without chemical solvents.

  • Frictional heat: Pressing nevertheless generates heat through friction. “Cold-pressed” therefore does not mean that the oil stays completely cold, but that the oil is obtained purely mechanically, without chemical solvents. The term is not a temperature specification. The heat depends on the seed, the speed and the nozzle setting.
  • Constituents: Many seeds contain valuable constituents such as fatty acids, vitamins and secondary plant compounds. Which of these remain in the oil depends on the seed, the temperature and the process.
  • Suspended matter: After pressing, cold-pressed oil is usually only left to settle (sediment) or filtered. It keeps the colour and taste of the seed.

Hot pressing and refining

In hot pressing, often combined with extraction, the seed is heated before or during pressing. This makes the oil thinner and the cell walls more permeable, which increases the yield.

  • Refining: The oil obtained in this way is often refined (degumming, bleaching, deodorising) to neutralise colour, smell and taste.
  • Taste: Refined oils taste neutral. Cold-pressed oils, by contrast, keep the typical taste of the seed, for instance nutty in pumpkin seed oil.

Who is cold pressing suited to?

A. Taste and character

Cold-pressed oil tastes of the seed it comes from. For direct marketers and small-batch producers this sets them apart from mass-produced goods.

B. Demand

Many customers look specifically for virgin or cold-pressed oils. Health-related claims about individual oils are legally regulated; check advertising claims carefully.

C. Your own raw material

Anyone who wants to market their own or purchased seeds as a high-quality product can process them themselves with their own press.

Technical challenge: yield in cold pressing

In cold pressing the yield is often somewhat lower than in hot pressing. Important adjustment points are the geometry of the press screw, the nozzle setting and the speed. Which screw suits which seed is shown in the Seeds overview.

Conclusion

Cold pressing and hot pressing differ above all in the temperature during pressing. Which process suits you depends on the product, the quantity and the taste you want.

Inquiry list

Nothing saved yet.

Inquiry by emailTo the contact page