FAQ
You will find answers about spare parts for oil presses in the frequently asked questions on the page Spare parts for oil presses. You will find more on this, and advice, under Comparison of Monforts and Oleo P.
Our oil presses
Which oil press is right for me?
That depends mainly on the throughput you want: the Oleo P 8 manages up to 8 kg/h, the Oleo P 10 up to 15 kg/h (with adjustable speed), the Oleo P 20 up to 20 kg/h and the Oleo P 40 up to 40 kg/h. We are happy to advise you in person.
What does “cold-pressed” mean and how does it differ from other processes?
In cold pressing, the seed is pressed exclusively by mechanical pressure – without chemical solvents. In hot pressing or chemical extraction, by contrast, higher yields are achieved.
What is included in the scope of delivery?
All OleoPress machines are delivered ready for use: including stainless steel hopper, electrical control cabinet, heating sleeve, complete nozzle set (Ø 5–16 mm) and special tool for changing the screw. No additional components are needed to start pressing straight away.
Are spare parts available?
Wear parts – press screws (R6, R8, R11), press cylinders, nozzles, press head and connecting nut – are generally available from stock.
Can I also use the machine for several types of seed?
Yes – changing between types of seed is possible. It is advisable to change the press screw (R8 for hard, R11 for soft material) and to clean thoroughly between pressing runs to avoid transfer of flavours. We advise you on the optimal machine configuration for your range of seeds.
Do you also offer filter presses and bottling plants?
Yes. For the complete oil production chain we offer matching filter presses (Oleo F 20, F 200, F 350, F 470) as well as bottle filling plants (AF3, AF4). This way you can get everything from seed to filled and labelled bottle from one source.
Spare parts for oil presses
How do I find out which spare part I need?
Send us the type designation of your machine and, if possible, the dimensions of the part to be replaced.
What is the difference between the R8 and R11 press screws?
The R8 is designed for hard seed such as rapeseed, sunflower and mustard, the R11 for soft seed such as linseed and walnuts with lower resistance. The comparison is on the page Press screw / worm screw.
Are parts also available for older IBG Monforts oil presses?
We offer spare parts for oil presses of IBG Monforts Oekotec GmbH & Co. KG. The parts of our OleoPress machines are similar to them, but not interchangeable. You will find more on this, and advice, on the page Comparison of Monforts and Oleo P. Further information is on the overview page on the IBG Monforts oil press.
IBG Monforts oil press – models and spare parts
Are spare parts from the former manufacturer still available for IBG Monforts oil presses?
Parts from IBG Monforts Oekotec are hard to find now that production has ended. OleoPress offers spare parts for the common wear points of the machines. Get in touch – we will clarify what is available for your model.
What can I press with a screw oil press?
Typical oil seeds are rapeseed, linseed, sunflower, pumpkin seeds, walnuts, hemp seed, mustard and many others. Suitability depends on the moisture, oil content and hardness of the seed. If in doubt, we recommend a test run with a small quantity.
Is it still worth repairing an IBG Monforts oil press?
That depends on its condition. If the base frame, motor and gearbox are still in order, replacing the wear parts (screw, press cylinder, nozzle) is often worthwhile. If, however, the machine as a whole badly needs refurbishing, a new machine may be more economical.
Where was IBG Monforts based?
IBG Monforts Oekotec GmbH & Co. KG was based in Mönchengladbach – just like OleoPress. We are based in Mönchengladbach and are your contact for everything to do with oil presses.
We are happy to answer any further questions in person.