This website was created with the help of AI and checked by us. Learn more

+49 2161 9173807office@oleopress.com
OleoPressInquiry

Cold pressing black cumin oil: how to do it

Black cumin oil is offered for the kitchen, for cosmetics and as an additive in animal feed. The small, black seed places special demands on the oil press. This guide shows what matters when pressing.

Reading time about 3 minutes

As of: November 2026

Why press black cumin purely mechanically?

Many seeds contain valuable constituents; which of these remain in the oil depends on the seed, temperature and process. If the seed is heated strongly during pressing, the aroma can also suffer. That is why black cumin is usually pressed purely mechanically, without chemical solvents and at the lowest possible temperature.

On the term: "Cold-pressed" means that the oil is obtained purely mechanically, without chemical solvents. Friction still generates heat. The term is not a fixed temperature specification; heat generation depends on the seed, speed and nozzle setting.

Why press black cumin oil yourself?

Oils sold in shops have often been stored for a long time. Anyone who presses their own knows the origin and freshness of the seed and can bottle the oil fresh after pressing. The typically sharp, spicy aroma is particularly pronounced in freshly pressed oil.

The technical challenges

Black cumin seeds are small and hard and have a comparatively low oil content (guide value approx. 30–38 %, see Seeds). For the oil press this means:

  1. Wear: The hard seeds act like an abrasive on the screw and cylinder.
  2. Keep an eye on heat generation: Frictional heat should be kept low through a suitable speed and nozzle setting.
  3. Choice of nozzle: The right nozzle decides whether the machine clogs or the oil runs off cleanly.

Tips for a good result

  • Seed quality: Pay attention to the origin and cleanliness of the seed.
  • Preparation: The seed should be clean and dry (residual moisture below 7 %).
  • The right machine: You will find suitable models under Our oil presses. Which screw suits black cumin is listed in the overview Seeds.
  • Using the press cake: The press cake can be put to further use, for example as a feed additive. Whether and how, please clarify with your veterinarian. More on this in How does an oil press work?

Step by step: pressing black cumin oil

  1. Cleaning the seed: Before the seed goes into the hopper, it must be free of small stones and foreign bodies so as not to damage the screw.
  2. Moisture control: The seeds should have a suitable residual moisture (usually around 6–8 %). Seed that is too dry creates dust and can block; seed that is too moist produces a muddy emulsion.
  3. Pressing: Start the press and set the nozzle so that a firm, even press cake is produced.
  4. Sedimentation (resting phase): Leave the freshly pressed, cloudy oil to stand for a few days in a cool, dark room. The suspended particles settle on the bottom. You can then draw off the oil from the top and bottle it.

Pressing your own black cumin oil

Whether you are optimising an existing plant or looking for an oil press for special seeds: OleoPress in Mönchengladbach, Germany will advise you.

  • Do you own an older press or an IBG Monforts press? You will find suitable wear parts in the overview. Monforts parts are similar to Oleo P parts, but not interchangeable; you will find more on this, and advice, under Comparison of Monforts and Oleo P.
  • Do you want to get started? Find out about our screw presses or talk to us.

Inquiry list

Nothing saved yet.

Inquiry by emailTo the contact page