Press cylinder (strainer cage)
Similar to the cylinders for IBG Monforts Oekotec oil presses, but not interchangeable, see Comparison of Monforts and Oleo P. Made of hardened steel, in two versions.

Versions
All parts on request.
IBG Monforts
Spare parts suitable for machines of IBG Monforts (e.g. CA59, D85, DD85).
Large press

Press cylinder, compatible with Monforts Oekotec
Square groove (E) or round groove (R) version, selectable aperture for your cold-pressed oil: 0.8 mm, 1.0 mm, 1.5 mm or 2.0 mm.
Monforts no. (12)
CA59
- 6009900000281 1.5 mm
- 6006821000018
- 6006821000099
- 6006821000106
DD85
- 6006821000037 1.0 mm
- 6006821000136 0.5 mm, slotted
- 6006821000036 1.5 mm
- 6006821000096 Material 1.4301
- 6009900021465 1.0 mm, round groove, material 1.4112
- 6009900021522 1.0 mm, round groove, material 31CrMoV9
- 6009900021466 1.5 mm, round groove, material 1.4112
- 6009900021521 1.5 mm, round groove, material 31CrMoV9
- Type E (square groove)
- Type R (round groove)
- Aperture 0.8 / 1.0 / 1.5 / 2.0 mm
on requestSend inquiry to Press cylinder, compatible with Monforts Oekotec
Oleo P
Spare parts for the Oleo P: press screws, perforated strainer cages, press head and nozzle.
Large press

OleoPress Perforated strainer cage
on requestSend inquiry to OleoPress Perforated strainer cage
Which part do I need?
Three details are enough for the inquiry:
- type designation of the machine from the nameplate, for example D85-1G or Oleo P 20
- a photo of the part or the place where it is fitted
- if possible the dimensions of the old part and the seed you press
We check which part fits and get back to you with a quotation.

- Type E: square groove version
- Type R: round groove version
- Selectable passage for your cold-pressed oil: 0.8 mm, 1.0 mm, 1.5 mm or 2.0 mm
Function of the press cylinder
The press cylinder is a central component of an oil press. It is the housing (the hollow body) in which the oil seed is pressed. The press screw (worm) rotates inside it and conveys the material under rising pressure to the press head with the nozzle.
- Taking in the material: The seed passes from the intake area via the hopper to the press screw.
- Generating pressure: Together with the press screw, the cylinder generates the mechanical pressure that releases the oil from the seed. The diameter of the holes is chosen according to the seed and influences the amount of oil that emerges.
- Guiding the press screw: The cylinder guides the screw precisely for smooth running.
- Limiting the pressing zone: It defines the area in which pressing takes place.
Versions E and R
| Version | Groove |
|---|---|
| Type E | square |
| Type R | round |
We are happy to discuss with you which version is suitable for your machine, see also Comparison of Monforts and Oleo P. You can find all spare parts in the overview of oil press spare parts.