Pressing your own rapeseed oil
When is the right time – and what really matters?
Anyone who wants to press their own rapeseed oil faces a question that decides yield and quality: when is the seed really ripe – and what conditions must be met during pressing? This guide gives you practical answers.
1. Harvest time: the most important factor for high-quality rapeseed oil
When is rapeseed ready to harvest?
Rapeseed should be harvested when the moisture content of the seed has fallen to 8–10 %. This usually corresponds to the stage at which the pods have taken on a brown-yellowish colour and a rattling sound can be heard when the plant is shaken lightly.
- Pod colour: brown-yellow to dark brown
- Seed colour: dark brown to black
- Moisture content: below 10 % (measurement with a moisture meter recommended)
- Period: typically end of July to mid-August in Germany
What happens if you harvest too early or too late?
Harvesting too early can lead to an increased chlorophyll content; the oil may then turn out greenish and may taste bitter. Harvesting too late increases the risk of pods bursting and thus harvest losses, and the risk of fungal attack also rises.
2. Seed preparation: how to achieve the optimal pressing process
Drying and cleaning
Before you put rapeseed into the oil press, the seed should be cleaned and dried to a moisture content of no more than 8 %. Damp seed leads to reduced yield, blockages in the screw and increased wear on the press cylinder and nozzle.
- Cleaning: removal of dirt, straw and foreign bodies
- Storage before pressing: dry and ventilated
- Measure moisture: ideally 6–8 %
Heating sleeve
All Oleo P models from the P 8 to the P 40 have a heating sleeve. It supports starting the press and pressing very hard seeds.
3. Temperature management during pressing – the key to quality
What does “cold-pressed” mean?
“Cold-pressed” describes a process in which the oil is obtained purely mechanically, without chemical solvents. Pressing nevertheless generates heat through friction. The term is not a fixed temperature specification; how warm the oil gets depends on the seed, speed and nozzle setting.
How do you regulate the temperature?
The heat build-up can be influenced via the pressing speed and the nozzle diameter. All models from the Oleo P 8 to the Oleo P 40 also have a heating sleeve.
4. Optimising yield – tried-and-tested tips
Typical yields with rapeseed
From 1 kg of rapeseed, 350–430 ml of oil can be pressed depending on machine setting and seed quality. The press cake still contains residual oil; how much depends on the seed and setting. It can be reused as animal feed or fertiliser (see Using the press cake).
- Optimal yield: 380–420 ml/kg of seed
- Pressing speed: slower = more pressure = higher yield (but more heat build-up)
5. Maintenance: what is often overlooked
Check wear parts regularly
The most common problems when pressing rapeseed oil arise from worn screws, worn-out press cylinders or blocked nozzles. Regular checks help keep the yield stable.
- Screw (press screw): check for material loss and scoring
- Press cylinder: look for cracks and even wear
- Nozzle: clean after every pressing shift
Conclusion
Pressing your own rapeseed oil succeeds when harvest, drying, press setting and machine care are right. If you have questions about the right machine, we are happy to advise you: Contact.
Further reading: Seed list (58 seeds) · Oil mill yield calculator · Our oil presses · Spare parts for oil presses