The most common mistakes in oil pressing – and how to avoid them

---

Introduction

When it comes to oil pressing, small details often decide about success or failure. Many problems such as low yield, poor quality or machine wear can be attributed to typical errors.

The good news: These mistakes are easy to avoid – if you know them.

---

Error 1: Wrong seed quality

The quality of the seed is the most important factor for oil yield.

Typical problems:

• too high humidity
• impurities
• Old or incorrectly stored seed

---

Error 2: Incorrect oil press setting

A wrong setting leads to:

• too little pressure
• incomplete pressing
• Inefficient operation

Understand how it works:

---

Error 3: The Wrong Machine

Not every oil press fits every application.

---

Error 4: Maintenance neglected

Wear parts must be checked regularly.

Typical consequences:

• falling yield
• higher energy costs
• machine damage

Maintenance in detail:

---

Error 5: Temperature ignored

The temperature affects:

• Quality
• Yield
• Durability

Understand differences:

---

Error 6: False expectation of yield

Many expect too much oil from the seed.

---

Error 7: Press cake not used

A big economic mistake.

---

conclusion

Most oil pressing problems are avoidable.

who:

• The right seed uses
• The machine is set correctly
• regularly waits

will achieve significantly better results.

Find the right machine now: