Heavy duty cold press 4 kW Strongest model IBG Monforts compatible Made in Europe

Oil press Oleo P 40 S – high-performance cold press with 4 kW and up to 40 kg/h

The Oleo P 40 S is the most powerful model in the entire OleoPress portfolio: with a 4 kW motor – the strongest in the entire series – and a seed performance of up to 40 kg/h is designed for the toughest requirements in continuous industrial operation. The ”’ stands for special: This high-performance variant combines the most powerful drive with the proven screw geometry of the P 40 series and is like all P 40 models Compatible with the original spare parts of the former IBG Monforts Oekotec oil presses of the DD85-G series.

---

#ATFP_CLOSE_Translate_Span#

---

#ATFP_CLOSE_Translate_Span#

The Oleo P 40 S in detail – the strongest model in the Oleopress portfolio

The Oil press Oleo P 40 S is the high-performance variant of the P 40 series and the most powerful model that Kambas Oleopress offers. The 4 kW motor Provides 33% more drive power than the P 40 N and P 40 U with 3 kW each – a decisive advantage for particularly hard, oil-rich seeds, with high residual oil content in the press cake or in pressing conditions where a 3-kW engine reaches its limits.

The increased torque of the 4 kW motor is particularly difficult to press seeds How to notice rapeseed with high moisture content, mustard seeds, hemp seeds or other seeds with a high proportion of fibers: Where a 3 kW engine has to reduce the speed or reduce the pressing pressure, the P 40 s works evenly through – For more constant yield and more reliable continuous operation under maximum load.

Like the entire P 40 series, the P 40 S is 2 heating sleeves and 2 sets of pressing nozzles (Ø 5-16 mm) and is offered in all three voltage variants: 230V 1-phase, 400V 3-phase and 230V 3-phase. with a dead weight of 220 kg And the proven press cylinder geometry of the P 40 series, it is designed for the most intensive industrial continuous operation.

The P 40 S is one Special version configured on individual request. Like all P 40 models, it is Compatible with the original spare parts of the former IBG Monforts Oekotec DD85-G – All wear parts are usually available from Kambas Oleopress from stock.

---

#ATFP_CLOSE_Translate_Span#

Alternative to IBG Monforts DD85-G – Compatible

Like all variants of the P 40 series, the Oleo P 40 S A direct alternative to IBG Monforts DD85-G and compatible with their original spare parts. All common wear parts are directly replaceable:

---

#ATFP_CLOSE_Translate_Span#

Scope of delivery of the Oleo P 40 S

The Oleo P 40 S is fully equipped and delivered immediately ready for use – with the extended scope of delivery of the entire P 40 series:

---

#ATFP_CLOSE_Translate_Span#

Why the Oleo P 40 S? The main advantages

---

#ATFP_CLOSE_Translate_Span#

Suitable oilseeds for the Oleo P 40 S

The OLEO P 40 S is particularly suitable for seeds that have a high pressing resistance or where constant pressing performance is required even under changing humidity and quality conditions:

---

#ATFP_CLOSE_Translate_Span#

Oleo P 40 S, P 40 N or P 40 U – which variant fits?

The Oleo P 40 S is the high-performance variant with the strongest motor – here the direct comparison:

	Oleo P 40 S (this page)	Oleo P 40 N	Oleo P 40 U
engine power	4.0 kW ★	3.0 kW	3.0 kW
Voltage	230V 1-PH | 400V 3-PH | 230V 3-PH	230V 1-PH | 400V 3-PH | 230V 3-PH	230V 1-PH | 400V 3-PH | 230V 3-PH
Weight	220 kg	220 kg	200 kg
heating sleeves	2×	2×	2×
Execution	special execution	Standard	Standard
IBG Monforts compatible	Yes ✓	Yes ✓	Yes ✓
Ideal for	Heaviest seeds, maximum load, toughest requirements	Continuous operation, most robust standard variant	Continuous operation, slightly lighter (200 kg)

Recommendation: The P 40 s is the right choice if you are working with particularly hard or wet seeds where a 3 kW motor is under maximum load or if you are looking for the most robust solution for the most intensive continuous operation. For most commercial applications, the P 40 n Oder P 40 u Fully sufficient with 3 kW.

---

#ATFP_CLOSE_Translate_Span#

Spare parts for the OLEO P 40 S – from stock

All wear parts of the Oleo P 40 S are usually available from Kambas Oleopress from stock.

---

#ATFP_CLOSE_Translate_Span#

Frequently asked questions about the Oleo P 40 S

When do I need the P 40 S instead of the P 40 N or P 40 U?

The P 40 S is the right choice if you work with particularly hard, fibrous-rich or wet seeds, where a 3 kW motor is under maximum load – recognizable by speed drops, elevated engine temperature or uneven press operation. For most common oilseeds (rapeseed, sunflowers, pumpkin, flax seeds), the P 40 N or P 40 U with 3 kW are completely sufficient. Talk to us – we will advise you which variant is optimal for your seed variety.

What does ‘special version’ mean for the P 40 S?

The P 40 S is a special version with 4 kW motor, which is configured on individual request. It is available in all three voltage variants as standard. In addition, further individual configurations can be implemented on request. Contact us for a personal consultation.

What is the advantage of 4 kW compared to 3 kW?

The 4 kW motor delivers 33% more drive power and thus higher torque. This is particularly effective for seeds that are difficult to press: the motor keeps the set speed constant without breaking in at resistance peaks. With normal seeds under normal load, the difference in practical operation is small – but the 4 kW motor has more reserves for extreme situations and wears out less.

How much seed can I process per week?

With a maximum seed output of up to 40 kg/h and typical operating times of 8 hours per day, weekly press volumes of over 1,000 kg can be achieved. The P 40 S is designed for the most demanding companies that have to reliably achieve these volumes even under difficult pressing conditions.

Are spare parts available in the long term?

Pressing spindles R8 and R11, type E and R pressing cylinders, nozzles, press heads, connecting nuts and hoppers – even years after the purchase. All parts are made in Germany and Europe, are usually available from stock and compatible with old IBG Monforts DD85-G machines.

Do you also offer filter presses and filling systems?

yes For the P 40 S we recommend the Filter press F 470 For maximum filter volume, alternatively the F 350. For the complete production chain, we also offer our Bottle Bottling Plants AF3 and AF4.

---

#ATFP_CLOSE_Translate_Span#

Matching products for the Oleo P 40 S

#ATFP_CLOSE_Translate_Span#